Foshan City Baojiali Household Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. huang sunny
  • Company Name : Foshan City Baojiali Household Co., Ltd.
  • Tel : 86-757-22390989
  • Fax : 86-757-26659267
  • Address : Guangdong,Foshan,Wenhua Square,Beijiaotown,Shunde
  • Country/Region : China

Aluminium Style Floor Standing Waterfall

Aluminium Style Floor Standing Waterfall
Product Detailed
Related Categories:Screens & Room Dividers
Aluminium frame waterfall 1)masterial:aluminum 2)easy to install 3)popular for home decoration and room divider

Aluminium frame waterfall 

This waterfall  can surely attract the eye of visitors,it is surprising  that the water can follow down according to  the S shape panel.

Unique decorations with lights! From the water flows down,there are light shinning on the water. Romantic,relax,luxious,splendid,dazzling,flowery... Different color change let them be perfect for different occasions.They are like a occasion resonator.

Warning:before fill the water in base fully,the pannel mustn't be placed into the base in case of the pannel falling down.

Frame material: aluminum with powder coating

panel material:clear glass,bronze mirror,silver mirror,colored glass,patterned glass,texured glass

light:warm white color

dimesion:A)H72 inchesXW 24inches x D10 inches

                  B)H59 inches X W 18inches X D 9 inches

1.Remove all the parts from the shipping cartons.

2.Lean the S/S panel upright against a wall until you further instructed.

3.Remove all the packaging material and parts from the base,which includes the decorative rocks,s/s trays,towel&light kit.

4.Place the piece of sponge onto the base of the fountain and put the pump assembly kit on top of it.NOTE:THIS SPONGE IS USE TO AVOID THE NOISE FROM THE VIBRATING PUMP.

5.Thread and feed the pump cord through the opening provided in the reservoir. Pull the pump cord through the opening leaving approximately 12 inches of the cord inside the reservoir.DO NOT plug the pump into your local power supply.

6.Take the panel with two people;slide the panel into the center of the base .Place a piece of cardboard over the base to prevent it from scratching.It is important to place the panel in the reservoir to the side with the plumbing coming out of the bottom.

7.Once the panel is in place,turn the screws securely into an upright position in the base.

8.Position the hose clamp into position then connect the tube to the PVC pipe coming out from the bottom of the panel.Tighten and secure the hose clamp with a screwdriver.

9.Thread the light cord located on the metal tray through the opening provided in the reservoir.Pull the light cord through the opening and plug the light cord into the transformer.

10.Place the metal tray with light onto the reservoir and arrange the decorative rocks to your liking.

11.Fill the reservoir with water until the water level reaches 1” over the top of the pump.Plug the pump & transformer into your local power supply.

  

  Note:Whereas the light can be submerged as it is an underwater lamp,the transformer for the light CAN NOT BE PUT IN WATER.It must be left outside the reservoir.

Aluminium Style Floor Standing Waterfall



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.